40 | Landscape & Turf Product Catalog NETAFIM USA 2” COMPACT LP DISC-KLEEN FILTER Automatic Self-Cleaning Disc Filter APPLICATIONS • Irrigation systems with a capacity of 1 to 80 GPM requiring clean water to operate emitters • For areas without electricity • When automation is desirable because manual cleaning is frequent and too cumbersome • For residential, commercial, industrial, parks, municipal and non-potable water sources SPECIFICATIONS • Inlet: 2” male pipe threaded • Outlet: 2” female pipe threaded • Flush port: 2” female pipe threaded • Maximum operating pressure: Standard and low flow models: 90 psi High pressure model: 140 psi • Minimum pressure for backflush: 30 psi • Minimum flow for backflush: Standard flow model: 35 GPM Low flow model: 20 GPM • Minimum allowable pH: 5 • Weight: 32 lbs. MATERIALS • Flush valves: plastic • Seals: nitrilo rubber, EPDM • Filter and spine: polypropylene • Discs: polypropylene • Clamp and screws: stainless steel FEATURES & BENEFITS PROVEN DISC TECHNOLOGY DEPTH FILTRATION Provides highly effective filtering. MADE OF NON-CORROSIVE MATERIALS Prevents rusting and corrosion from chemicals and weather. COMPACT PRE-ASSEMBLED UNIT FOR EASY INSTALLATION Fits in tight spaces, saves space. Factory assembled and tested. Delivered ready for hook-up and immediate operation. LESS BACKFLUSH TIME REQUIRED Optimizes irrigation with a more uniform application of water. INCLUDES BACKFLUSH CONTROLLER AC model uses 110VAC power. DC model uses four D batteries. WATER QUALITY * STANDARD FLOW MODEL MAXIMUM FLOW RATE (GPM) GOOD AVERAGE POOR VERY POOR 80 70 55 35 80 & 120 MESH 50 40 30 20 40 MESH WATER QUALITY * LOW FLOW MODEL MAXIMUM FLOW RATE (GPM) GOOD AVERAGE POOR VERY POOR 50 40 30 20 80 & 120 MESH 40 30 20 10 40 MESH * WATER QUALITY GOOD WATER QUALITY: Municipal water supply or well water from a clean aquifer with no sand, iron or manganese. AVERAGE WATER QUALITY: Wells with small amounts of sand (< 2 ppm) or clean surface water which includes lakes, ponds, reservoirs and canals. POOR WATER QUALITY: Well water with sand up to 10 ppm or surface water in hot climates with increased biological growth and no chemical treatment which includes lakes, ponds, reservoirs and canals. VERY POOR WATER QUALITY: Well water with greater than 10 ppm of sand including rivers, muddy canals, lakes and ponds with severe run off deposits and raw municipal wastewater. GREATER THAN 3 PPM SAND OR SILT: May require a pre-filter such as a hydrocyclone.